Hunter Douglas Silhouette A Deux

Questions and Answers

C
Cody GordonSep 16, 2025
Why does my Hunter Douglas Indoor Furnishing shade raise or lower unevenly?
- T
  Tyler HoffmanSep 16, 2025
  If your Hunter Douglas Indoor Furnishing shade raises or lowers unevenly, or the bottom rail is uneven when fully raised, ensure that the headrail and installation brackets are level and aligned, using shims if necessary. Also, check for any obstructions in the shade’s path. If the shade hits something while lowering, it may misalign. Try lowering the shade completely and then raising it to allow it to self-correct.
D
David JohnsonAug 25, 2025
Why is my Hunter Douglas Window Blinds shade hard to raise or lower?
- B
  Barbara CookAug 25, 2025
  If your Hunter Douglas Window Blinds shade is hard to raise or lower, or won't move at all, consider these potential issues: First, remember that shadings cannot be forced into tight inside mount window openings. If it's an inside mount, ensure the headrail is correctly installed and there's enough clearance between the ends of the shade and the window casement. Check that the installation brackets are level and aligned; adjust or shim if needed. If you have EasyRise™, make sure the cord tensioners are mounted correctly. For LiteRise®, close the vanes by pressing down on the front of the handle before raising or lowering.
J
Justin HornAug 25, 2025
Why is the bottom rail on my Hunter Douglas PowerView Window Blinds not raising or lowering completely?
- T
  Timothy CantuAug 26, 2025
  If the bottom rail on your Hunter Douglas PowerView Window Blinds shade isn't raising or lowering completely, or its position has changed, the batteries in the battery wand or satellite battery pack may be low, so try replacing them. Also, make sure the battery wand, satellite battery pack, or 18V DC power supply is securely connected to the power cable, and that the cables aren't pinched or caught in the headrail or installation brackets.
W
wbyrdAug 26, 2025
What to do if Hunter Douglas PowerView Window Blinds shade is not responding to the remote?
- V
  Victoria LangAug 27, 2025
  If your Hunter Douglas PowerView Window Blinds shade isn't responding to the remote, first check that the correct group number is selected. Then, check that the batteries in the remote are correctly inserted and are fresh. The LEDs that backlight the remote should light up fully when you press STOP.
B
Brooke RodriguezSep 18, 2025
What to do if the Hunter Douglas Indoor Furnishing universal cord tensioner grabs onto the cord upon operation?
- C
  Charles MorrisSep 18, 2025
  If the universal cord tensioner on your Hunter Douglas Indoor Furnishing is grabbing the cord during operation, check that it is mounted properly. Reinstall it, if necessary.
A
Austin JonesSep 23, 2025
Why don't the vanes align on my Hunter Douglas Silhouette A Deux shadings?
- T
  Tammy MartinSep 23, 2025
  Vane alignment for Hunter Douglas shadings is only guaranteed within 1/4" when the shadings are ordered at the same time, at the same height, with the same color and fabric, and specified on the order form. Ensure the windows are square and of the same height.
J
Joel MurilloSep 8, 2025
Why won't my Hunter Douglas Silhouette A Deux shading snap into the brackets?
- D
  debbieglennSep 9, 2025
  If your Hunter Douglas shading won't snap into the installation brackets, check that the brackets are aligned and level. Also, make sure the locking tab on the installation bracket slides over the headrail.
J
Jennifer AdamsSep 9, 2025
How to reattach tassel cord on Hunter Douglas Indoor Furnishing UltraGlide shading?
- C
  Cole GillSep 9, 2025
  To reattach the tassel cord on your Hunter Douglas UltraGlide shading, hook one side of the lower cord connector to the upper cord connector. Rotate the lower cord connector until it snaps into place. Twirl the tassel cord to remove any stray cord fibers from the junction of the cord connector halves, as these can cause the connector to come apart.
M
Michelle Miller MDSep 3, 2025
What to do if the Hunter Douglas Silhouette A Deux Indoor Furnishing shade will not fit into the installation brackets?
- R
  Rebecca GravesSep 3, 2025
  If your Hunter Douglas Indoor Furnishing shade does not fit into the installation brackets, check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush against the installation bracket and that the headrail is completely inserted into the installation brackets.
Q
qmillerSep 1, 2025
What to do if lift cords are bunching in Hunter Douglas Window Blinds?
- M
  Michael GomezSep 1, 2025
  If the lift cords are bunching by the safety cord connector in your Hunter Douglas Window Blinds, ensure the slats are in the open position. Then, raise and lower the blind to straighten the lift cords.

Hunter Douglas Silhouette A Deux Specifications

General

Brand	Hunter Douglas
Model	Silhouette A Deux
Category	Indoor Furnishing
Installation	Professional installation recommended
Material	Fabric
Sizes Available	Custom Sizes
Specialty Applications	Arched, Angled, and Specialty Windows
Product Type	Window Shade
Fabric Options	Multiple Colors and Textures