OPERATION
14
LiteRise
®
Shadings
IMPORTANT: With LiteRise
®
lifting systems, the front shading must be raised before the rear
roller shade can be operated.
■ Slowly and steadily pull down on the bottom
rail handle to lower the shading or roller
shade.
■ Front shading only: With your thumb on the
front of the handle and fingers on the back,
gently pull the back of handle down and
away from the shading to open the vanes.
➤ Use the handle to tilt the vanes to the
desired open/closed position.
➤ Push down on the front of the handle to
close the vanes.
■ Slowly and steadily push up on the handle to
raise the shading or roller shade.
To Next Page
Loading...
Need help?
General
