Hunter Douglas PowerView Reference Guide

Performing a programming reset
A programming reset will remove the shade from the PowerView® network and group assignments will be erased.
Your shade is now "disconnected" from the PowerView® network. If you are using the PowerView® APP you should
manually delete the blind there too. To reconnect your blind to the PowerView network see adding a blind to a group .
Performing an end limit calibration
An end limit calibration will recalibrate the end limits stored in the shade. The shade automatically searches its new end
limits by moving up and down.
Note: This procedure is not applicable on EOS® 500 Rollerblind and Twist™ shades.
4.
Press the  favorite button
(You will see the blind move up and down briey)
5. Release the blind button .
6. If your remote is still ashing Press stop for 6 seconds.
(Keep pressing until the ashing stops)
1. Press the blind button for approximately 12 seconds.
(The blind will jog after 6 seconds and nally after 12 seconds)
2. Release the blind button .
1. Press the manual control button for approximately 6 seconds.
(The blind will jog after 6 seconds)
2. Release the manual control button .
(Depending on the product the shade will start moving up and down several times
dening new open and close positions)
MANUAL
Page 16 of 22 version: 1.3

Hunter Douglas PowerView Specifications

General

Control Method	Remote control, smartphone app, voice control
Connectivity	Wi-Fi, Bluetooth
Power Source	Battery-powered
Integration	Amazon Alexa, Google Assistant, Apple HomeKit
Scheduling	Yes
Scene Control	Yes
Battery Life	Approximately 1 year depending on usage
Compatibility	Hunter Douglas blinds and shades
App Features	Remote access, scheduling, scene control, integration with smart home systems