Hunter Douglas PowerView Reference Guide

Add a repeater using the App
Repeater location
The range of any indoor wireless device is always dicult to determine. Factors like used building materials and presence
of other wireless devices can have a big (negative) impact on wireless range. To improve the range of the PowerView®
network repeaters can be used.
A repeater picks up any incoming wireless PowerView® signal and transmits it again at full power increasing the range
of the signal being sent.
In practice nding the ideal location of a repeater is a bit of trial and error. But the below rules of thumb can be a good
help:
• Preferably don't use more than 6 repeaters.
5.4
Press  stop .
(The repeater light will turn off. The repeater is
now part of your personal PowerView® Network.)
1. Make sure your repeater is reset
2. Open the app. Select blinds and discover shades .
3. The repeater light should start blinking and nally end with the led switched off.
MANUAL
Page 4 of 22 version: 1.3

Hunter Douglas PowerView Specifications

General

Control Method	Remote control, smartphone app, voice control
Connectivity	Wi-Fi, Bluetooth
Power Source	Battery-powered
Integration	Amazon Alexa, Google Assistant, Apple HomeKit
Scheduling	Yes
Scene Control	Yes
Battery Life	Approximately 1 year depending on usage
Compatibility	Hunter Douglas blinds and shades
App Features	Remote access, scheduling, scene control, integration with smart home systems