Hunter 42700 - Operating the Remote Control and Mounting the Holder

14
42700-01•01/15/08•HunterFanCompany
10 • Operating the Remote Control and Mounting the Holder
10-1.eremotetransmitterhasindividualbuttonsforturningthefan
oandonandcontrollingthelightandfanspeed.
10-2.Forbestoperation,startthefanbypressinghigh,thenselectyour
desired speed.
10-3.ereversingswitchreversesthedirectionofthefan.
10-4.PresstheOFFbuttontoturnthefano.
10-5.elightbuttonturnsthelightontofullbrightness.Pushthe
lightbuttonagaintoturnothelight.
10-6. You can mount the remote holder to any toggle switch plate with
thescrewsalreadyintheswitchplate.Or,youcansimplymount
the remote holder on the wall.
10-7.isproductincludesone12-volttype23A,MN-21batteryfor
use with the remote control transmitter. Please contact your local
batteryrecyclingcenterforproperbatterydisposalinformation.
Step 10-6
Fan Light
Fan Speed
High
Fan Speed
Medium
Fan Speed
Low
FanO
ReversingSwitch
Steps 10-1 – 10-5
Step 10-7