EasyManua.ls Logo

Hunter Advocate series User Manual

Hunter Advocate series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2
1886
1886
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you’ll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
x4
x2
x2
x2
For installing the hanger bracket and wiring the fan
For installing the canopy
Canopy
Canopy Screw
Ceiling Bracket
Wood Screw
Wire Nut
Washer
bag
Hunter Pro Tip:
Find a part that is missing or damaged?
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
Here is what comes in your box:
bag
x12 x12
For installing the blades
Remote
For installing the light kit
Glass
Light Kit Assembly
Lower Switch Housing
LED Assembly
Blade ScrewBlade Washer
bag bag
Spare Parts
For your convenience,
you may receive extra fasteners.
bag
x5Light Kit Screw
bag
x2
Short Light Kit
Screw
Downrod
Adapter Cover
M3664-01 r121417
x4
Blade
Question and Answer IconNeed help?

Do you have a question about the Hunter Advocate series and is the answer not in the manual?

Hunter Advocate series Specifications

General IconGeneral
BrandHunter
ModelAdvocate series
CategoryFan
LanguageEnglish

Summary

What Comes in Your Box

Customer Support for Missing Parts

Contact information for missing or damaged components.

Installing the Downrod

Step 4: Secure Setscrew with Pliers

Properly tightening the setscrew using pliers for safety.

Fan Fall Hazard Warning

Critical safety warning about fan fall hazards and setscrew tightening.

Hanging the Fan

Fan Handling Notice

Important notice on how to lift and handle the fan assembly.

Wiring the Fan

Single Switch Wiring

Instructions for connecting wires with a single wall switch.

Dual Switch Wiring

Instructions for connecting wires with dual wall switches.

Installing the Blades

Assembling the Light Kit

Fan Fall Hazard Warning (Light Kit)

Safety warning for ensuring light kit screws are tight.

Installing the Glass

Glass Fall Hazard Warning

Safety warning for ensuring the glass is properly secured.

Installing the Remote Control Cradle

Setting up SIMPLEconnect™ WiFi

Troubleshooting

Fan Doesn't Work

Steps to diagnose and fix a non-operational fan.

Excessive Wobbling

Causes and solutions for fan wobbling issues.

Remote Control Erratic

Troubleshooting steps for inconsistent remote control performance.

Remote Only Works Close to Fan

Diagnosing issues with limited remote operating range.

Noisy Operation

Identifying and resolving sources of fan noise.

Multiple Remote Issues

Addressing interference problems with multiple remotes or fans.

Wireless Issues

Steps to reset the fan's wireless module.

Limited Lifetime Warranty

How to Obtain Warranty Service

Procedures for requesting warranty service and contact information.

What Does This Warranty Cover?

Explanation of motor and other component warranty coverage.

Downrod Replacement

Fan Fall Hazard Warning (Downrod)

Safety warning for correct downrod assembly and verification.

Related product manuals