Deck and deck floor-pans are covered
only by the one-year limited warranty.
Floor-pan sizes will vary by boat type and
size. They are not covered by the five-
year limited warranty
Footnote 1. All wooden bulkheads, modular components, floors, floor
supports , paneling, trim, coring materials, faceplates, countertops,
fiberglass tabbing, overlays, secondary bonding , sealants , adhesives,
gaskets and epoxies are covered only by the one-year limited warranty.
They are not covered by the five-year limited warranty.
Internal fiberglass pan
and fiberglass grid
system are covered by
the five-year limited
warranty.
All fiberglass tabbing, overlays ,
adhesives, epoxy and secondary
bonding are covered only by the
one-year limited warranty. They
are not covered by the five-year
limited warranty.
Internal fiberglass pan
and fiberglass grid
system are covered by
the five-year limited
warranty.
Hull to deck joint adhesives,
epoxies and sealants are
covered only by the one-year
limited warranty. They are
not covered by the five-year
limited warranty.
The fiberglass hull component
is covered by the five-year
limited warranty. Installed
items such as (but not limited
to) ports, shafting, thru-hulls,
vents and struts are not cov-
ered by the five-year limited
warranty. The rudder and
keel are excluded from all
warranties.
Rudder , keel and
centerboards (small
boats) are excluded
from all warranties.
Keel and centerboard
leaks at the attachment
point are excluded
from all warranties.
Footnote 3. Keel and rudder are not covered under
the blister warranty. They are not covered under
the one-year or five-year limited warranty’s.
Footnote 2. Voids located within the deck or hulls gelcoat
surface or build laminate are covered only by the one-year
limited warranty. They are not covered by the five-year limited
warranty.
GRAPHIC EXPLANATION OF WARRANTY COVERAGE