Master Valve (P/MV) Operation per Station
For selecting a master valve to be on/off for an individual zone, this can be done when
editing the zone in zones and schedules under advanced settings. This option is useful
when one zone is using city water and another is using from another source.
Note: This option is for HPC and HCC controllers only.
Please follow the steps below to change this setting.
1. From the ZONES AND SCHEDULES page, click on the icon on the zone you would
like to edit.
2. Click on ADVANCED located on the top blue search section.
3. Select Use GLOBAL MASTER VALVE SETTING to keep this circuit on or select
DISABLE MASTER VALVE to turn this circuit off.
Sprinklers Running with the
Controller Off or Unplugged
To Next Page
Loading...
Need help?
General
