Hunter TC39 Series - Placing Wheel on Tire Changer; Wheel Support Plate Height Adjustment

TC39 Series Changer Operation Instructions Basic Procedures •
••
• 13
2.2 Placing Wheel on TC
Wheel Support Plate Height Adjustment
The wheel support plate on the TC is height adjustable to allow a wide range of
wheels to be serviced.
Use the highest setting for most high offset wheels.
Standard wheels typically use the middle height.
Use the lowest height for most reverse drop-center wheels.
To adjust center support height, pull the knob outwards on center support and raise or
lower center support table to desired height.