TC39 Series Changer Operation Instructions Basic Procedures •
••
• 19
2.4 Demounting Tires from Rim
NOTE: For rims that have a clear coat finish, clean the
mount/demount head to remove dirt and debris before
demounting the tire from the rim.
CAUTION: If the wheel has a TPMS sensors installed, keep the sensor
under the upper roller when inserting tool head. This will
prevent the tool head from contacting the sensor.
CAUTION: Improper procedures on the next step may damage tool
head. Refer to “Demounting” on page 10 for more details.
With the upper roller pressing down on the tire insert the mount / demount head in
between the bead and the rim.
Remove the upper roller.
To Next Page
Loading...
