Hunter TC39 Series - Mounting Tough, Low Profile Tires

TC39 Series Changer Operation Instructions Basic Procedures •
••
• 25
2.6 Mounting Tough, Low Profile Tires
Lubricate both beads.
Mount lower bead. Plus Device is not needed here.
Position the tire on the mounting tool and lower the upper bead roller on the side wall.
Insert the Traction tool. The valve is positioned at 5 o’clock.
Turn clockwise until the Traction Tool reaches the 4 – 5 o’clock position.
Position the roller of the Plus Device on the tire sidewall at the 2 o’clock position and
press the bead into the drop centre.
Turn clockwise until the upper bead is mounted.