Installation and
Care Instructions
LiteRise
®
Touch System
Wood Blinds and
Alternative Wood Blinds
Tools needed for installing your blind:
• Measuring tape
• Pencil
• Flat blade screwdriver
• Phillips screwdriver
• Carpenter’s level
• Power drill, drill bits and
1
/4" hex bit
socket (or socket wrench with
1
/4"
hex socket)
In addition, you will need fasteners designed to work with your specifi c
mounting surfaces:
THANK YOU for purchasing a Hunter Douglas product. Your new
blind has been custom built for you from the highest quality materials.
Once in your window, it will provide you with a lifetime of beauty and
trouble-free use.
Getting Started
• Remove the blind from the package. Keep the packaging until the blind
operates to your satisfaction.
• Check the diagram to make sure you have the necessary parts.
• Contents of your hardware package may vary depending upon mounting
options chosen and whether intermediate brackets are needed.
Drywall, Plaster
Metal
Wood
Mounting Surface
Fastener
Wall Anchors, Expansion Bolts
(Not Provided)
Sheet Metal Screws
(Not Provided)
No. 6 Hex Head Screws
(Provided)
End
Bracket
Valance
End
Bracket
Intermediate
Bracket
Bracket
Shim
2" or 4" Extension
Brackets (Optional)
alance Clips
(Woods)
alance Clips
(Alt. Woods)
Corner Clips for
Valance Returns
(Woods)
Corner Clips for
Valance Returns
(Alt. Woods)
To Next Page
Need help?
General
