25
Trends
Trends are displayed graphically or tabular over a 1, 8 or a 24-hour
period.
From the main application screen, pressing the TAB
displays the trends screen.
The system displays three buttons. From this point, the operator
can customise the data.
1 HOUR
GRAPH
SETUP
TRENDS
Switches the trend scale between 1, 8 or 24
hours.
Switches the display between graphical and
tabular format.
Enable / disable parameter trend selection.
11.1 Graphical or tabular display of trends
Switching from GRAPH to TABLE shows a table of readings, with
the time at the left side. The up and down arrows enable the user
to scroll the table as required.
If temperature has been selected as a trend, a button at the top of
the temperature column can be pressed to switch between T1 and
T2. If any other dual readout trends are present and selected these
will also be provided with similar buttons.
11.2 Clearing Trends
The SET UP TRENDS screen also contains a button marked CLEAR
TRENDS, pressing this clears all stored trend information from
memory. Alternatively, switching the unit off will clear all trend
information.
11.3 Closing the trends screen
Press to close the trends screen.
11. Trends
To Next Page
Loading...
