Use the touch screen to the adjust setting. The alarm levels can be
set for both high / low heart rate limits and the % saturation level
using the + or - symbols.
Pressing the
or
symbol turns the alarm OFF or ON.
Alarms
Press to exit from this function.
Alarm ON
Alarm OFF
Temperature probes are not supplied with the system, however, the
SC1000 supports YSI 400 compatible sensors.
Follow the manufactures instruction for use.
Insert the temperature probe(s) into the sockets labelled T1 and or
T2 on the ECG / TEMPERATURE / SpO
2
module.
15.1 Temperature set up
Press the area of
the screen to display the
.
The
following options will be
available: -
Depending on the number of sensors fitted to the system, the
appropriate number of digital displays (a maximum of two) will
appear in the lower part of the screen display.
If dual temperatures are being monitored, is also displayed.
15. Temperature Monitoring
TEMP
TEMP SETUP
To Next Page
Loading...
