Operator Manual v 2.6 — April 2012 Introduction
Purpose of the Equipment 1
Chapter 1 Introduction
This chapter describes the machine, training opportunities, and the available equipment
manuals.
1.1 Purpose of the Equipment
Husky equipment and systems are designed for injection molding applications only, using
approved materials and operating within design guidelines.
Contact your nearest Husky Regional Service and Sales office if you plan to use a Husky
product for anything other than its intended use.
1.2 Restrictions of Use
Husky injection molding equipment must never be:
• used for any purpose other than that described in Section 1.1, unless otherwise
approved by Husky
• used to extrude metal or food compounds
• operated or serviced by personnel unfamiliar with the inherent risks and necessary
precautions related to injection molding equipment
• operated at temperatures higher than the maximum presumable temperature for
plasticizing
• operated by more than one person
1.3 Unauthorized Modifications
Unauthorized modifications or reconstruction of any Husky injection molding system is
strictly prohibited. Modifications, such as the substitution or removal of components, can be
unsafe and/or void warranty.
Contact your nearest Husky Regional Service and Sales office to discuss modifications or
requirements for Husky systems.
To Next Page
Loading...