3
Safety Equipment
Chain Brake
Disassembly
Disengage chain brake. Remove clutch cover
retaining nut and remove cover. Clean chain
brake and clutch cover assembly,
Remove hand guard retaining screw. Rethread
screw into pivot sleeve two turns. Press on
screw head to drive out inner pivot sleeve half.
Turn cover to opposite side. Using a suitable
punch, remove outer half of pivot sleeve.
Separate hand guard from cover.
4
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
