76 – English
LUBRICATION SYSTEM
Cleaning and Inspection
Clean all parts and check the following
when appropriate to the saw in question.
That the taper on the adjuster screw
shows no signs of wear.
That the pump piston's eccentric face does
not show signs of wear.
The oil pipe is not blocked and the filter
screen is clean.
That all seals are undamaged.
That the worm gear on the oil pump drive
is undamaged.
That the pump piston's pinion gear is undamaged.
Eng, p 40-82 96-09-13, 10.3276
To Next Page
Loading...
