4. Clean the product. Refer to
Maintenance on page 21
for instructions.
5. Do a complete servicing of the product.
Technical data
Technical data
Husqvarna 281 XP Husqvarna 288 XP
Engine
Cylinder displacement, cm
3
80.7 87
Idle speed, rpm 2500 2500
Maximum engine power acc. to ISO
8893, kW/hp @ rpm
4.2/5.6 @ 9000 4.5/6.0 @ 9300
Ignition system
1
Spark plug NGK BPMR7A NGK BPMR7A
Electrode gap, mm 0.5 0.5
Fuel and lubrication system
Fuel tank capacity, liter/cm
3
0.9/900 0.9/900
Oil tank capacity, liter/cm
3
0.5/500 0.5/500
Type of oil pump Adjustable Adjustable
Weight
Weight, kg 7.6 7.6
Noise emissions
2
Sound power level, measured dB(A) 116 117
Sound power level, guaranteed L
WA
dB(A)
117 117
Sound levels
3
Equivalent sound pressure level at
the operator’s ear, dB(A)
106 106
Equivalent vibration levels, a
hveq
4
Front handle, m/s
2
7.6 7.5
Rear handle, m/s
2
9.6 8.5
Saw chain/guide bar
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
2
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
3
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
2
.
34 964 - 003 - 20.02.2021
To Next Page
Loading...
