L
. Assemble the clutch drum and clutch in the order
shown. NOTE: Be sure to lubricate the clutch
drum bearing to prevent chain drag at idle speed.
. Spin the clutch assembly onto the crankshaft and
tighten by tapping on a drift inserted in one of the
holes provided
in the clutch driver. CAUTION:
Do not start the engine without the guide bar,
chain and clutch cover
in place.
NOTES
L
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
