8
●
●
●
Remove the 4 screws securing the fuel/oil tank to
the crankcase.
Carefully slide the fuel/oil tank forward to check/ .
replace the gasket that forms inlet and delivery
channels for the oil pump. NOTE: A collapsed
gasket will restrict oil flow.
Slide the oil pump worm over the crankshaft and,-
using a suitable tube-style aluminum drift, tap the
gear down to within .025” of the crankcase/seal
face.
Apply grease to the worm gear teeth.
Continue assembly in reverse order to
disassembly.
NOTE: Apply Ioctite 242 to the
pump securing screws.
NOTES
d
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
