10
. Position and secure the rear handle/frame asse-
mbly. NOTE: Be sure to install the shock moun
safety restraint strap.
‘--,.-
. Fit the front handle and lower shock mount. The
upper fastener (shown) has a special “thread
form” that will offer resistance during both the
removal and assembly procedures.
. Assemble the air filter element and the air filter
cover. NOTE: The on/off switch wiring nests in
the notch provided in the lower rear edge of the
top cover.
● Install the spark plug. Position and secure the
starter assembly.
Assemble the spark plug
access cover to the starter housing (shown).
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
