To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
2. Attach the transportation guard.
3. Clean the product. Refer to
Maintenance on page 21
for instructions.
4. Do a complete servicing of the product.
Technical data
Technical data
Husqvarna 555 Husqvarna 562 XP Husqvarna 562 XPG
Engine
Cylinder displacement, cm
3
59.8 59.8 59.8
Idle speed, rpm 2800 2800 2800
Maximum engine power
acc. to ISO 8893, kW/hp @
rpm
3.1/4.2 @ 9600
3.5/4.8 @ 9600 3.5/4.8 @ 9600
Ignition system
1
Spark plug NGK CMR6H NGK CMR6H NGK CMR6H
Electrode gap, in/mm 0.020/0.5 0.020/0.5 0.020/0.5
Fuel and lubrication system
Fuel tank capacity, US
Pint/liter
1.37/0.65
1.37/0.65 1.37/0.65
Oil tank capacity, US Pint/
liter
0.7/0.33
0.7/0.33 0.7/0.33
Type of oil pump Adjustable Adjustable Adjustable
Weight
Weight, lb/kg 13/5.9 13.4/6.1 13.9/6.3
Saw chain/guide bar
Type of drive sprocket/
number of teeth
Rim/7
Rim/7 Rim/7
Saw chain speed at 133%
of maximum engine power
speed, m/s.
28.3
28.3 28.3
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
34 587 - 002 - 04.12.2019
To Next Page
Loading...
