Husqvarna 562 XP - Page 36

Approved cutting equipment for Husqvarna 562 XP, Husqvarna 562 XPG:
Guide bar Saw chain
Length, in/cm Pitch, in Gauge, in/mm Max. nose radius Type Length, drive
links (no.)
18/46 3/8 0.058/1.5 11T, 34 mm Husqvarna H42
Husqvarna H48
Husqvarna C85
68
20/50 72
24/61 84
28/71 93
18/46 3/8 0.050/1.3 11T, 34 mm Husqvarna H46
Husqvarna H47
Husqvarna C83
68
20/50 72
24/61 84
28/71 93
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain. A
Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
H25 4.8 mm / 3/16 in
US: 596285601
CA: 505698109
0.025 in / 0.65
mm
30° 80°
H42, H48, H46,
H47
5.5 mm / 7/32 in
US: 596285401
CA: 505243501
0.025 in / 0.65
mm
25° 55°
C85, C83 5.5 mm / 7/32 in
US: 586938602
CA: 586938601
0.025 in / 0.65
mm
30° 60°
36 587 - 002 - 04.12.2019