Husqvarna 576 XP/G AT - Page 26

26 – English
ELECTRICAL SYSTEM
Replacing the front hand grip
1. Dismantle the earth cable. See g. 16.
Fig. 16
Fig. 18
Fig. 17
2. Remove the ve bolts (A, B and C) which hold the
front hand grip. See g. 17.
3. Fit the new front hand grip by screwing in the ve
bolts (A, B and C). Tighten the bolts to 4 Nm. See
g. 17.
4. Connect the two cables (A and B). See g. 18.
5. Fit the earth cable (A). See g. 16.
A
2 x A
B
C
A
B