Why is the 12 V battery discharged on my Husqvarna Motorcycle?
A discharged 12V battery on your Husqvarna Motorcycle could be because the ignition wasn't switched off when the vehicle was parked, so charge the battery. Alternatively, the alternator might not be charging the battery, so check the charging voltage and open-circuit current.
Why is the time not correctly displayed on my Husqvarna 701 Enduro 2023?
General| Displacement | 692.7 cc |
|---|---|
| Bore x Stroke | 105 mm x 80 mm |
| Compression Ratio | 12.7:1 |
| Starter | Electric |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Suspension | WP XPLOR-USD, Ø 48 mm |
| Rear Suspension | WP XPLOR with Pro-Lever linkage |
| Ground Clearance | 270 mm |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Engine Type | Single-cylinder, 4-stroke |
| Power | 55 kW (74 hp) |
| Torque | 73.5 Nm |
| Fuel System | Fuel injection |
| Front Brake | Disc brake, 300 mm |
| Rear Brake | 240 mm disc, 1-piston caliper |
| ABS | Standard, disengageable |
| Seat Height | 910 mm |
| Fuel Capacity | 13 l |
| Wheelbase | 1504 mm |
| Dry Weight | 146 kg (322 lbs) |
Defines the correct intended use of the vehicle and its limitations.
Warns against improper use of the vehicle and potential dangers.
Explains danger levels and associated symbols for safety.
Identifies and locates important labels affixed to the vehicle.
Provides essential safety guidelines for operating the motorcycle.
Emphasizes the importance of wearing appropriate protective gear.
Information on maintenance, tuning, and service intervals.
Describes clutch, brake levers, throttle grip, and horn button functions.
Explains operation of light switch, turn signals, starter, and emergency stop.
Explains operation of ride modes and traction control settings.
Explains the meaning of various dashboard indicator lights.
Guides on setting display units, time, and service intervals.
How to adjust or reset the service interval reminder.
Essential checks and advice before the initial ride.
Outlines the recommended procedure for running in the new engine.
Lists essential checks before every ride for safety and roadworthiness.
Step-by-step guide on how to safely start the motorcycle.
Advice on gear shifting, handling, and safe riding practices.
Important warnings and procedures for effective and safe braking.
Guidelines for safely stopping and parking the motorcycle.
Safe procedures and guidelines for refueling the motorcycle.
Details maintenance intervals and required service tasks.
Explains the ABS system's function, operation, and warnings.
Guidance on checking and maintaining front brake fluid levels.
Detailed steps for replacing front brake pads.
Guidance on checking and maintaining rear brake fluid levels.
Detailed steps for replacing rear brake pads.
Guidelines for inspecting tire wear, damage, and tread depth.
Essential steps for checking and maintaining correct tire pressure.
Safety warnings and steps for checking coolant levels.
Detailed procedure for checking coolant level in all reservoirs.
How to correctly check the engine oil level.
Detailed steps for an oil change and filter replacement.
Steps to prepare the motorcycle for long-term storage.
A guide to diagnosing and resolving common vehicle issues.
Specifies torque values for various engine fasteners.
Details required specifications for fluids like brake fluid, coolant, and engine oil.
To Next Page