8 RIDING INSTRUCTIONS
26
8.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when it is being operated.
H02217-01
– Check that the electrical system is functioning properly.
– Check the engine oil level. ( p. 117)
– Check the front brake fluid level. ( p. 83)
– Check the rear brake fluid level. ( p. 89)
– Check the front brake linings. ( p. 85)
– Check the brake linings of the rear brake. ( p. 91)
– Check the function, condition, and free travel of the brake
system.
–
Check the coolant level. ( p. 107)
– Check for chain dirt accumulation. ( p. 72)
– Check the chain, rear sprocket, engine sprocket, and chain
guide. ( p. 75)
– Check the chain tension. ( p. 73)
– Check the tire condition. ( p. 98)
– Check tire pressure. ( p. 98)
– Check the spoke tension. ( p. 99)
Info
The spoke tension must be checked regularly as
incorrect spoke tension will strongly impair riding
safety.
– Clean the dust boots of the fork legs. ( p. 49)
– Bleed the fork legs. ( p. 49)
– Check the air filter and clean if necessary.
– Check the settings of all controls and ensure that they can be
operated smoothly.
– Check all screws, nuts, and hose clips regularly for tightness.
– Check the fuel level.
8.2 Starting the vehicle
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
– Always make sure there is sufficient ventilation when running the engine.
– Use effective exhaust extraction when starting or running the engine in an enclosed space.
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
– Always run the engine warm at a low speed.
To Next Page
Loading...
Need help?
General
