3 Prepare and do servicing on the product
3.1 Servicing schedule
Maintenance task Before use
After each
use
Every 10
hours
Every 25
hours
Product
Do a general inspection. X
Clean the product. X
Clean the transmission covers. Make sure that the motor does
not have grass on it.
X
Examine the drive wheels. X
Do a general lubrication. X
Do a check of the start inhibitor. X
Make sure that the safety devices on the product are not defec-
tive.
X
Examine the cutting equipment. X
Examine the cutting cover. X
Do a check of the motor brake handle. X
Make sure that the bail arm functions correctly. X
Make sure that the ON/OFF switch operates correctly. X
Clean and examine grass catcher. X
Clean the filters and the air outlet. X
Clean under the drive cover. X
Accessory
Examine the battery for damage. X
Do a check of the battery charge. X
Make sure that the release button on the battery operates cor-
rectly and that the battery locks into the product.
X
Examine the battery charger for damage and make sure that it
operates correctly.
X
Examine the connections between the battery and the product. X
Examine the connection between the battery and the battery
charger.
X
6 - Prepare and do servicing on the product 1292 - 001 -
To Next Page
Loading...
