EasyManua.ls Logo

Husqvarna P 525D - ROPS and Safety Belt Usage; Auxiliary Lift System Function

Husqvarna P 525D
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 – English
PRESENTATION
ROPS (Roll Over Protective
Structure)
ROPS is a protective frame that reduces the risk of injury in
the event of overturning. Use ROPS and a safety belt when
driving on slopes.
The frame can be folded down. Remove the two pins that hold
the frame and fold it backwards.
If the frame is folded down the safety belt should NOT be
used.
If the frame is folded up, the safety belt must be used.
When the safety belt is not used, it must be wrapped around
the chair back and tightened.
Auxiliary lift system
The auxiliary lift system transfers the weight of the cutting unit
pivot wheel to the machine's front wheel.
The effect of the auxiliary lift system can be adjusted by
moving the gas spring up or down.
Maximum effect is obtained when the gas spring is placed in
the top hole.
No effect is obtained in the slot at the bottom.
When using the cutting unit, the gas spring must be mounted
in the top hole.

Table of Contents

Other manuals for Husqvarna P 525D

Related product manuals