English – 11
MACHINE´S SAFETY EQUIPMENT
ROPS check
• Check that the ROPS is securely attached and not
damaged.
Safety belt
The seat belt protects the driver from injury in case of crashes
or overturning.
The belt may only be used when the bar (ROPS) has been
raised or a cab is fitted on the machine.
When the safety belt is not used, it must be wrapped around
the chair back and tightened.
Seat belt check
• Check regularly that the seat belt is intact and secured
correctly.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Inspecting the muffler
• Check that the muffler is securely attached and not
damaged.
Protective covers
Protective covers on the machine protects the user from the
cooling fan, belt drives and hot surfaces.
Checking the protective covers
• Check the protective covers for cracks or other damages.
Replace damaged covers.
1 Transmission cover
2 Service hatch
3 Cover Plate
4 Side cover
5 Engine cover
6 Belt cover
!
WARNING! Never use a machine without a
muffler, or with a faulty muffler. A damaged
muffler may substantially increase the noise
level and the fire hazard. Keep fire fighting
equipment handy.
!
WARNING! The inside of the muffler contain
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a
damaged muffler.
The muffler gets very hot during and after
use as well as when idling. Be aware of the
fire hazard, especially when working near
flammable substances and/or vapours.
!
WARNING! Always check that the protection
covers are correctly fitted before starting the
machine.
6
5
3
2
1
4
To Next Page
Loading...
