English – 45
TECHNICAL DATA
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 3: Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
Technical data concerning the cutting unit
Cutting unit Combi 132 Combi 155
Cutting width, cm/inch 132 / 52 155 / 61
Cutting heights, 7 positions, mm/inch 25-127 / 0,98-5,0 25-127 / 0,98-5,0
Weight, kg/lb 100/220 131 / 289
Bevel gear oil SAE 80W/90, capacity 0.4 l SAE 80W/90, capacity 0.4 l
Cutter
Part number 5441757-10 5441758-10
Blade length, mm/inch 490 / 19,3 563 / 22.2
Technical specifications for sound and vibration levels
P 520D P 525D
Combi 132 Combi 155 Combi 132 Combi 155
Noise emissions (see note 2)
Sound power level, measured dB (A) 102 105 102 105
Sound power level, guaranteed dB(A) 103 105 103 105
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 88 90 88 89
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
2
1,7 1,7 1,7 1,7
Vibration level in the seat, m/s
2
0,7 0,7 0,7 0,7
IMPORTANT! When the service life of this product has been served and it is no longer used it should be returned to the dealer
or to an applicable station for recycling.
IMPORTANT! We reserve the right to change specifications and designs without prior notice so as to implement improvements.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
To Next Page
Loading...
