Why Husqvarna PG 400 Petrol Floor Machine does not start?
Your Husqvarna Floor Machine might not start because the operator presence control isn't engaged. Ensure you hold the operator presence control against the handlebar when pulling the starter rope handle. Also, check if the fuel tank or oil tank are empty and fill them if necessary.
What to do if Husqvarna PG 400 Petrol Floor Machine stops after a while?
If your Husqvarna Floor Machine stops after a while, it might be due to a high load. Try attaching more diamond tools or using a harder bond. Also, ensure the fuel tank cap is fully tightened during operation.
Why Husqvarna PG 400 Petrol Floor Machine has sudden movements?
Sudden movements in your Husqvarna Floor Machine can occur if the diamond tools aren't correctly installed or if they have different heights. Ensure all diamond tools are installed correctly and are of the same height.
Why Husqvarna Floor Machine is not easy to hold on to?
If your Husqvarna Floor Machine is difficult to hold, it may be due to having too few diamond tools on the grinding head. Use the correct number of diamond tools.
Why does my Husqvarna Scrubber not start?
Your Husqvarna Scrubber might not be starting due to a few reasons. Ensure the operator presence control is engaged by holding it against the handlebar when pulling the starter rope. Also, check if there's fuel in the fuel tank and oil in the oil tank; if not, fill them accordingly.
Why is my Husqvarna Scrubber difficult to hold on to?
If your Husqvarna Scrubber is difficult to hold, it could be due to using too few diamond tools on the grinding head. Ensure you are using the correct number of diamond tools for the job. The incorrect type of diamond tools for the surface can also cause this issue.
What to do if my Husqvarna Scrubber has sudden movements?
Sudden movements in your Husqvarna Scrubber can be caused by incorrectly installed diamond tools or diamond tools with different heights. Ensure all diamond tools are installed correctly and are of the same height.
Why does my Husqvarna Floor Machine stop after a while?
If your Husqvarna Floor Machine stops after a while, ensure that the fuel tank cap is fully tightened during operation. Also, verify that the height and weight adjustments are correct, and consider attaching more diamond tools or switching to a harder bond if the load is too high.
What to do if Husqvarna PG 400 Petrol Floor Machine has sudden movements?
If your Husqvarna Floor Machine has sudden movements, check that all diamond tools are installed correctly and ensure they all have the same height.
Outlines crucial safety practices and precautions for operating the product safely.
Recommends essential PPE like eye protection, gloves, helmet, and hearing protection.
Warns about carbon monoxide and hydrocarbons in exhaust fumes and ventilation needs.
Ensures safety devices and operator presence control function correctly.
Details critical safety measures for handling flammable fuel to prevent hazards.
Guides users through the safe and correct procedure for changing diamond tools.
Provides detailed instructions and precautions for safely refueling the product.
Details steps for starting the engine, including throttle and fuel valve settings.
Presents maintenance tasks and their intervals based on usage and time.
Explains the procedure for checking the engine oil level.
Lists common product issues with their likely causes and fixes.
General| Brand | Husqvarna |
|---|---|
| Model | PG 400 Petrol |
| Category | Floor Machine |
| Language | English |
To Next Page