113
Lubrication
Accessories
Lubrication or other maintenance of optional
equipment or accessories, see “Accessories” on
page 55, is not described in this manual. This
equipment too, naturally, requires maintenance. See
the manuals for the respective accessories for
instructions.
Lubricating in Accordance with the
Lubrication Schedule
The numbers in the following headings refer to the
lubrication points as described in “Lubrication
Schedule” on page 111 and
“General” on page 112.
1. Pivot wheel bearings
4 nipples (wheels and pivot shaft bearing), lubricate
using a grease gun until grease is forced out.
2. Handle for cutting height setting
Lubricate the front and rear handles using the oil can.
To Next Page
Loading...
