103
Maintenance
Cutting Unit Model
PT 26D can be equipped with two different types of
cutting unit:
• Combi 132
• Combi 155
The digits indicate the cutting width in cm.
Older types of cutting unit cannot be attached.
Combi 155 can be mounted 8 cm (3 1/8") to one side
in relation to the machine.
Check that the blades’ securing screws are tightened
with the torque:
Combi 132 and 155: 75 - 80 Nm / 53 - 56 lbft.
To Next Page
Loading...
