93
Maintenance
Replacing the bulb in the headlight
Applies to the headlight lamp.
For information about the bulb type, see “Technical
data”.
1. Remove the plastic covers (41+43) surrounding
the steering wheel console.
2. Disconnect the cable (Caution! plastic hooks) and
carefully lift off the unit with warning lamps (39).
3. Remove the headlight console (34) from the
steering wheel console, 4 x screws. (If the
headlight insert is removed from its mounting
frame, the headlight must be realigned.)
4. Disconnect the electrical terminal from the bulb.
IMPORTANT INFORMATION:
When the plastic covers are removed, the unit with
warning lamps is released. Do not damage it.
To Next Page
Loading...
