83
Maintenance
Adjusting the parking brake
Brake adjustment should be carried out by a
Husqvarna workshop.
1. Raise the machine so that the wheels rotate freely.
2. When the parking brake has been released, check
that partial braking of the front wheels does not
occur.
3. Check that the braking effect is even and that the
wheels stop with normal pedal travel.
4. Check that the pedal can be locked in the applied
position with normal pedal force.
5. Adjust as necessary using the wires' adjuster
screws (R and L).
WARNING:
R
L
Parking brake control
A poorly adjusted parking brake can result in
reduced braking ability.
To Next Page
Loading...
