74
Maintenance
Check the wheel nuts - ❍
Check the parking brake, adjust if
necessary
5
83 ●
Check the safety function 92 ●
Check/adjust the cutting unit settings.
(tilt angle)
5
99 ●
Replace the air filter and clean the
cyclone filter
84 ●
Replace the belts (power take-off belt
and cutting unit belt)
Adjust the power take-off belts
5
- ●
Check the condition of the hydraulic
hoses
5
- ❍
Replace fuel filter and check hoses
4
- ❍
● = Described in this manual
❍ = Not described in this manual.
Maintenance Page Daily main-
tenance
Weekly
main-
tenance
Maintenance interval hours
befor after
500 1000 2000 3000250
To Next Page
Loading...
