Husqvarna T540 XP - Contents; Table of Contents

CONTENTS
4 – English
Contents
KEY TO SYMBOLS
Symbols on the machine: ...................................... 2
Symbols in the operator’s manual: ........................ 3
CONTENTS
Contents ............................................................... 4
INTR ODUCTION
Dear Customer , ..................................................... 5
WHA T IS WHAT?
What is what on the chain sa w? ........................... 6
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 7
Important .............................................................. 7
Always use common sense .................................. 7
Personal protective equipment ............................. 8
Machine ′ s safety equipment ................................. 8
Cutting equipment ................................................. 11
ASSEMBL Y
Fitting the bar and chain ....................................... 17
FUEL HANDLING
Fuel ....................................................................... 19
Fueling .................................................................. 20
Fuel safety ............................................................ 20
ST ARTING AND STOPPING
Star ting and stopping ............................................ 21
W ORKING TECHNIQUES
Bef ore use: ............................................................ 23
General working instructions ................................ 23
How to avoid kickback ........................................... 30
MAINTENANCE
Gener al ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment ..................................................
31
Muffler ................................................................... 33
Starter ................................................................... 33
Air filter .................................................................. 35
Spark plug ............................................................. 35
Lubricating the bar tip sprocket ............................. 36
Needle bearing lubrication .................................... 36
Adjustment of the oil pump. ................................... 36
Cooling system ..................................................... 36
Winter use ............................................................. 37
Temperature -5 ° C or colder: ................................. 37
Maintenance schedule .......................................... 38
TECHNICAL D ATA
T echnical data ....................................................... 39
Guide bar and saw chain combinations ................ 40
Saw chain filing and file gauges ........................... 40
EC-declaration of conformity ................................ 40