7 Technical data
7.1 Technical data
Motor
Type BLDC (brushless) 36V
Features
Low energy mode savE
Lubrication system
Type of oil pump Adjustable
Oil tank capacity, liter/cm
2
0.18/180
Weight
Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg 2.6
Water protection level
IPX4 Yes
Noise emissions
1
Sound power level, measured dB(A) 101
Sound power level, guaranteed L
WA
dB(A) 103
Sound levels
2
Equivalent sound pressure level at the operator's ear, dB(A) 92
Vibration levels
3
Front handle m/s
2
2.6
Rear handle m/s
2
2.6
Equivalent vibration levels
4
Front handle m/s
2
2.2
Rear handle m/s
2
2.1
Saw chain/guide bar
Recommended bar lengths, inch/cm 12-16/30-40
Usable cutting length, inch/cm 11-15/28-38
Type of drive sprocket/number of teeth Spur/6 or 7
Maximum chain speed / (savE), m/s 24 (18)
Radio frequency data for
Frequency band, GHz 2.4-2.4835
1
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
2
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for dif-
ferent sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
3
Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
. Declared vibration data from measurements when the machine is fitted with a bar
length and recommended chain type. If the machine is fitted with a different bar length, the vibration level may
vary by max ± 1.5 m/s
2
.
4
Equivalent vibration level is measured and calculated as for combustion engine powered chainsaws. These fig-
ures are quoted to be able to compare vibration data regardless of type of engine according to ISO 22867:2011.
1204 - 001 - 03.12.2019 Technical data - 25
To Next Page
Loading...
