Why is my Husqvarna Motorcycle 12 V battery discharged?
A discharged 12 V battery in your Husqvarna Motorcycle could be due to the ignition not being switched off when the vehicle was parked; in this case, charge the 12-V battery. Another possibility is that the 12-V battery is not being charged by the alternator, so check the charging voltage and the open-circuit current.
Why are the headlight and position light not functioning on my Husqvarna VITPILEN 401 2020 Motorcycle?
If the headlight and position light are not functioning on your Husqvarna Motorcycle, fuse 6 may be blown. Change the fuses of individual power consumers.
Why are the turn signal, brake light, and horn not functional on my Husqvarna Motorcycle?
If the turn signal, brake light, and horn are not functional on your Husqvarna Motorcycle, fuse 4 or 6 may be blown. Change the fuses of individual power consumers.
General| Brand | Husqvarna |
|---|---|
| Model | VITPILEN 401 2020 |
| Category | Motorcycle |
| Language | English |
Explains the meaning of symbols used throughout the manual for clear communication.
Details the typographical conventions and formats employed in the document.
Defines the proper and intended use of the vehicle to ensure safety.
Outlines dangers and consequences associated with using the vehicle improperly.
Provides general guidance on following safety instructions for safe operation.
Explains hazard symbols and their associated risk levels for user awareness.
Warns against illegal modifications to the noise control system and vehicle design.
Details essential practices for safe riding and operating the motorcycle.
Emphasizes the importance of wearing appropriate protective gear for riding safety.
Lists essential rules and procedures for performing maintenance and repairs safely.
Offers guidance on environmentally responsible use and disposal of vehicle materials.
Stresses the importance of reading and keeping the owner's manual for proper vehicle use.
Clarifies warranty conditions and requirements for service to maintain validity.
Provides notes on proper handling and use of fuels and auxiliary substances.
Advises on using approved spare parts and accessories for safety and performance.
Highlights the importance of regular service for optimal operation and longevity.
Notes that manual figures may show special equipment or be simplified.
Directs users to authorized dealers for questions and support regarding the vehicle.
Illustrates and labels key components of the motorcycle from the front-left view.
Illustrates and labels key components of the motorcycle from the rear-right view.
Shows the location of the VIN, crucial for identification and registration.
Indicates the location of the vehicle's type label containing important specifications.
Explains how to find the key number for ordering spare keys and its importance.
Locates the engine number, essential for engine identification and service records.
Provides the location of the fork article number for parts identification.
Identifies the location of the shock absorber article number for parts lookup.
Describes the location and function of the clutch lever on the left handlebar.
Details the hand brake lever, located on the right handlebar for front brake control.
Explains the throttle grip's location and function on the right handlebar.
Covers switches on the left handlebar, including high beam, light, and turn signals.
Covers switches on the right handlebar, including the emergency OFF and start buttons.
Explains the function and positions of the ignition and steering lock system.
Details the procedure for locking the steering to secure the parked vehicle.
Describes how to unlock the steering to allow movement of the handlebars.
Provides instructions on safely opening the fuel tank filler cap, including warnings.
Details the correct procedure for closing the fuel tank filler cap securely.
Explains the location and operation of the seat lock, typically using the ignition key.
Indicates the location of the tool set, usually found under the seat.
Describes the grab handle's purpose for maneuvering and passenger support.
Explains the folding mechanism of passenger foot pegs for different riding scenarios.
Details the location and operation of the shift lever for gear changes.
Describes the location and function of the foot brake lever for rear brake activation.
Explains the location and use of the side stand for parking the motorcycle.
Introduces the main instrument cluster and its attached components.
Describes the activation process and the instrument's self-test sequence upon ignition.
Explains how various warnings and error messages are displayed to the rider.
Details the meaning and function of various indicator lamps on the instrument panel.
Explains the operation and configuration of the shift warning light for optimal gear changes.
Describes the various display areas and the information they convey to the rider.
Details how the fuel level is shown and the associated low fuel level warnings.
Explains the coolant temperature gauge and its overheating warnings.
Covers the MODE and SET buttons for navigating display modes and menus.
Explains how to view and change the ABS operating mode.
Describes the Info display for showing pending messages and warnings.
Covers ODO, TRIP 1, and TRIP 2 displays for distance, fuel range, service, time, speed, F.C.
Guides on how to adjust the ABS mode between ROAD and SUPERMOTO.
Explains how to set display units for distance and volume according to regional preferences.
Provides instructions for setting the 24-hour clock on the instrument display.
Details how to set the engine speed threshold for the first shift warning light.
Explains how to set the engine speed threshold for the second shift warning light.
Offers crucial advice for initial vehicle preparation, safety, and familiarization.
Provides guidelines for the engine break-in period to ensure longevity.
Covers important considerations and warnings related to vehicle weight and load distribution.
Lists essential pre-ride checks and maintenance tasks for safe operation.
Details the correct procedure for starting the motorcycle engine safely.
Explains how to safely pull away and begin riding the motorcycle.
Describes the Easy Shift system for clutchless up and down gear shifting.
Provides guidance on proper shifting, cornering, and general riding techniques.
Explains the correct methods for applying both front and rear brakes effectively.
Details safe procedures for stopping the vehicle and parking it securely.
Offers advice and precautions for transporting the motorcycle.
Provides safety instructions and guidelines for refueling the fuel tank.
Offers supplementary details regarding service intervals and work scope.
Lists mandatory service tasks and their recommended intervals based on time or mileage.
Outlines recommended maintenance tasks and their suggested service intervals.
Introduces the options for adjusting the chassis for riding style and load.
Guides on how to adjust the fork's compression damping for desired suspension behavior.
Explains the process of adjusting the fork's rebound damping for suspension tuning.
Details how to adjust the rebound damping of the rear shock absorber.
Guides on setting the spring preload for the shock absorber based on load.
Describes how to safely lift the motorcycle using rear lifting equipment.
Explains the procedure for safely removing the motorcycle from rear lifting gear.
Details the process for lifting the motorcycle using front lifting equipment.
Guides on safely lowering and removing the motorcycle from front lifting gear.
Explains how to clean the dust boots on the fork legs to maintain seal integrity.
Details the steps required to remove the motorcycle seat.
Provides instructions for correctly installing the motorcycle seat.
Outlines the steps for removing the left side body panel.
Details the procedure for reinstalling the left side body panel.
Explains how to remove the right side body panel.
Provides instructions for reinstalling the right side body panel.
Guides on how to remove the license plate bracket assembly.
Details the procedure for installing the license plate bracket.
Explains how to remove the front spoiler component.
Provides instructions for installing the front spoiler.
Describes how to inspect the drive chain for dirt and grime buildup.
Details the process for cleaning the motorcycle's drive chain.
Explains how to check and measure the drive chain tension.
Guides on how to adjust the drive chain tension to the correct specification.
Details how to inspect the chain and sprockets for wear.
Guides on adjusting the free play in the clutch lever for optimal operation.
Explains the ABS system's components and general function.
Guides on adjusting the hand brake lever's position for rider comfort and control.
Details how to inspect brake discs for wear, damage, and thickness.
Explains how to check the front brake fluid level and potential issues.
Provides instructions and safety warnings for adding front brake fluid.
Details how to inspect the front brake pads for wear and thickness.
Explains how to check the rear brake fluid level and associated warnings.
Provides instructions and safety warnings for adding rear brake fluid.
Details how to inspect the rear brake pads for wear and thickness.
Explains how to check the free play of the foot brake lever.
Guides on adjusting the free play of the foot brake lever to specification.
Details the procedure for safely removing the front wheel.
Provides instructions for correctly installing the front wheel.
Explains the steps for safely removing the rear wheel.
Details the procedure for correctly installing the rear wheel.
Guides on inspecting the rear hub damping rubbers for wear and damage.
Explains how to inspect tires for cuts, wear, and damage.
Details the correct procedure for checking tire pressures for solo and passenger loads.
Explains how to check the tension of the wheel spokes.
Advises on the proper use and limitations of tire repair spray in emergencies.
Provides step-by-step instructions for safely removing the 12-V battery.
Details the correct procedure for installing the 12-V battery.
Explains the proper methods and safety precautions for charging the 12-V battery.
Guides on how to locate and replace the main fuse for the vehicle's electrical system.
Details the process for replacing fuses related to the Anti-lock Braking System (ABS).
Explains how to replace fuses for specific electrical components and accessories.
Describes how to check the correct aiming and height of the headlight beam.
Guides on how to adjust the headlight's vertical aiming for optimal road illumination.
Indicates the location of the diagnostics connector for electronic system checks.
Identifies the location of front accessory power supply connections.
Indicates the location of the rear accessory power supply connection.
Explains the basic function and components of the motorcycle's cooling system.
Details the procedure for checking coolant level and antifreeze protection.
Guides on verifying coolant levels in the compensating tank and radiator.
Provides instructions for safely draining the coolant from the system.
Explains the process for refilling and removing air from the cooling system.
Details the procedure for completely changing the coolant in the system.
Explains how to check the free play in the clutch lever before riding.
Guides on adjusting the clutch lever's free play for optimal engagement.
Details how to check the shift lever's resting position relative to the rider's boot.
Guides on adjusting the shift lever's position for comfortable and effective shifting.
Explains the correct procedure for checking the engine oil level.
Details the process for performing an engine oil and filter change.
Guides on how to add engine oil and the recommended types.
Provides guidelines for safely and effectively cleaning the motorcycle.
Outlines maintenance steps and precautions for storing or operating the motorcycle in winter.
Details the steps for properly preparing and storing the motorcycle for extended periods.
Explains the necessary steps to take the motorcycle out of storage and prepare it for riding.
Lists detailed technical specifications for the motorcycle's engine.
Provides a table of specific torque values for engine fasteners.
Lists the fluid capacities for engine oil, coolant, and fuel.
Details technical specifications related to the motorcycle's chassis components.
Lists technical data for the motorcycle's electrical system components.
Specifies the recommended tire sizes and types for the motorcycle.
Details technical data and adjustment ranges for the front fork suspension.
Lists technical data and adjustment ranges for the rear shock absorber.
Provides a table of specific torque values for chassis fasteners.
Details the required standards and recommended types for brake fluid.
Lists requirements for coolant, including antifreeze protection and composition.
Specifies the required standards and recommended types for engine oil.
Details the type and specifications for fork oil.
Provides information and warnings regarding the use of Gasohol 95 E20 fuel.
Lists the type and specifications for shock absorber fluid.
Provides guidelines and warnings for using super unleaded fuel.
Lists recommended chain cleaners for motorcycle maintenance.
Suggests recommended fuel additives for stabilizing fuel.
Lists recommended long-life greases for lubrication.
Lists recommended cleaners for the motorcycle's exterior.
Suggests products for maintaining painted surfaces.
Recommends cleaners for various finishes like matte paint and plastic.
Lists recommended chain sprays for street use.
Suggests recommended universal oil sprays for lubrication and protection.
Explains the JASO T903 MA2 standard for motorcycle engine oils.
Describes the SAE system for classifying oil viscosity.
Defines the Anti-lock Braking System (ABS).
Explains the function of the Easy Shift system.
Defines On-Board Diagnosis (OBD) and its role in vehicle electronics monitoring.
Explains symbols indicating error conditions or active driving aids.
Explains symbols that convey informational content or status.
To Next Page