EasyManua.ls Logo

Hussmann Q2SSM4S - Merchandiser Leveling; Serial Plate Location; Refrigeration Unit Access

Hussmann Q2SSM4S
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-4 InstallatIon
P/N 0562873_M U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
MERCHANDISER LEVELING
Be sure to position merchandisers properly.
Level the merchandiser by all four corners.
Merchandiser(s) must be installed level to
ensure proper operation of the refrigeration
system, and to ensure proper drainage of
defrost water.
SERIAL PLATE LOCATION
The serial plate is located on the inside of the
merchandiser’s display area as shown below.
REFRIGERATION UNIT ACCESS
The rear front panel may be removed by
lifting the panel straight upward and over the
tabs on which it is hanging. Screws will have
to be removed from either end of the panel.
The panel is installed by reversing the above pro-
cedure. Ensure lower front panel is flat against
the floor when installed to prevent air circula-
tion problems.
Serial Plate
Remove Rear
Panel

Related product manuals