Hydro Action AP-500 - Hydro-Action AP Series Pump Selection; Description of AP Series Compressor Pumps; Description of AP Series Effluent Pumps

Appendix 2: Hydro-Action
®
AP Series Pump Selection
Note: Please see Hydro-Action
®
Pump Manual for each manufacturer OEM Manual
Description of AP Series Compressor Pumps
The Hydro-Action
®
AP Series ATU’s have several approved types of compressor pumps
available. NSF has approved these models and by no means does Hydro-Action
®
condone the
use of any other replacement pump not included on this list. Hydro-Action
®
uses three which
are; Hi-blow Linear, Gast Linear, and Gast Rotary Vane…
AP Series
Hi-Blow
Gast
Gast
Model
Linear
Linear
Rotary
AP500
HP-80
DBMS80
AT05-101
LPA500
HP-80
DBMS80
AT05-101
AP600
HP-100 LL
DBMS100
AT05-101
AP750
HP-120LL
DBMS120
AT05-101
AP1000
HP-150
DBMX150
1023-101
AP1500
HP-200
DBMX200
1023-101
Description of AP Series Effluent Pumps
The Hydro-Action
®
AP Series utilize many effluent pumps. NSF does not regulate the pump
tank component of NSF std. 40 systems unless it is a component of treatment. Therefore, any
comparable pump may be used. Hydro-Action
®
currently uses Barnes for its standard pump
and the mid-suction Hydromatic for all drip irrigation applications. See manuals below for
information.
AP Series
Barnes
Hydromatic
Model
Standard
SP-33
HE 20-51
Drip Application
High Head 1/2 HP
HE 12-51
High Flow 1/2 HP
HE 30-51
High Head 1 HP
HE 25-10
High Flow 1 HP
HE 35-10