Hydropool Serenity 45L - Page 22

22
PUMP 1 FUNCTION
Press this key (JET or JET 1) to acvate the pump
1st press – low speed (indicator light flashes)
2nd press – high speed (indicator light on solid)
3rd press – turns off (indicator light off)
PUMPS AUTOMATIC TIME-OUT
Time out – 15 minutes
The display will show Edxx, with “xx” represenng the duraon in hours of the economy mode. Use the arrow
keys to adjust the hour. Use the Light Key to jump to the next parameter, temperature unit.
Water temperature can be displayed in either Fahrenheit (
o
F) or Celsius (
o
C). The display will show
o
F or
o
C. Use
the arrow keys to change the seng. Use the Light Key to save all the parameters.
COOLING DOWN
Aer heang the spa water to the desired set point, the heater is turned off, but the filtraon pump remains on
for a certain amount of me to ensure adequate cooling of the heang element in order to prolong the useful life
of the heater. The heater icon flashes during this me.
HYDROPOOL SERENITY SERIES CONTROL SYSTEMS GECKO IN.YE3
NORTH AMERICA / EUROPE
SMART WINTER MODE
Smart Winter Mode protects your system from the cold by turning the pumps on several mes a day to prevent
water from freezing in the pipes. The Smart Winter Mode indicator turns on when in this mode of operaon. If
the temperature drops to 4
o
C (39
o
F) within the heater chamber, the system automacally acvates the pump to
provide freeze protecon. The pump will operate unl the temperature reaches 5
o
C (41
o
F) before returning to
normal system mode.
PUMP 2 FUNCTION
Press this key (JET 2) to acvate the pump
1st press – high speed (indicator light on solid)
2nd press – turns off (indicator light off)
PUMPS AUTOMATIC TIME-OUT
Time out – 15 minutes