21
HYDROPOOL SERENITY SERIES CONTROL SYSTEMS NORTH AMERICA /
EUROPE GECKO IN.YE3
The display will show Edxx, with “xx” representing the duration in hours of the economy mode. Use the arrow
keys to adjust the hour. Use the Light Key to jump to the next parameter, temperature units.
Water temperature can be displayed in either Fahrenheit (
o
F) or Celsius (
o
C). The display will show
o
F or
o
C.
Use the arrow keys to change the setting. Use the Light Key to save all the parameters.
SMART WINTER MODE
Smart Winter Mode protects your system from the cold by turning the pumps on several times a day to prevent
water from freezing in the pipes. The Smart Winter Mode indicator turns on when in this mode of operation. If
the temperature drops to 4
o
C (39
o
F) within the heater chamber, the system automatically activates the pump to
provide freeze protection. The pump will operate until the temperature reaches 5
o
C (41
o
F) before returning to
normal system mode.
COOLING DOWN
After heating the spa water to the desired set point, the heater is turned off, but the filtration pump remains on
for a certain amount of time to ensure adequate cooling of the heating element in order to prolong the useful
life of the heater. The heater icon flashes during this time.
PUMP 1 FUNCTION PUMP 2 FUNCTION (if equipped)
Press this key (JET or JET1) to activate the pump. Press this key (JET2) to activate the pump.
1
st
press – low speed (indicator light flashes) 1
st
press – high speed (indicator light on solid)
2
nd
press – high speed (indicator light on solid) 2
nd
press – turns off (indicator light off)
3
rd
press – turns off (indicator light off)
PUMPS AUTOMATIC TIME-OUT
Time out = 15 minutes
To Next Page
Loading...
