EasyManua.ls Logo

Hydropool SS19ET - Hydroclear Purewater System; Hydroclear System Operation; Hydroclear Maintenance and Service

Hydropool SS19ET
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
HYDROCLEAR PUREWATER SYSTEM
HOW IT WORKS
This system combines the benefits of both Ozone and UV-C sanizaon ulizing a patented UV
Chamber to both inject ozone into the water, mix it and then expose it to powerful UV-C rays,
all-in-one. This process not only kills and deacvates microorganisms in the water it passes, but also
creates a powerful hydroxyl radical to burn off contaminants and dissolved solids within the water to
significantly increase the clarity of the spa water. The UV-C rays also breakdown chloramines which are
the main cause of respiratory, eye and skin irritaon typically associated with chlorine. Harmful/
corrosive off gassing is also dramacally reduced through this process.
MAINTENANCE AND SERVICE
While operang, check regularly to see if bubbles are entering the spa.
Aer 10,000 hours the UV LED will begin flashing yellow indicang its me to replace the UV-C lamp.
Replace the check valve assembly annually to ensure connued opmal performance from the
Hydroclear Pure Water System.
To replace the UV-C lamp or check valve please go to www.balboawatergroup.com/UVSanizer for
the procedure on how to do this.
IMPORTANT
YOU MUST CONTINUE TO CHECK YOUR WATER CHEMISTRY REGULARLY AND SOME SANITIZING
CHEMICALS WILL STILL BE NECESSARY TO TREAT THE WATER. CONSULT YOUR SPA PROFESSIONAL
FOR FURTHER ADVICE.

Table of Contents

Related product manuals