Hydropool SS19ET - Protecting Your Cabinet Everlast Finish; Cleaning the Everlast Cabinet

58
PROTECTING YOUR CABINET EVERLAST FINISH
HYDROPOOL swim spa cabinets are made from a unique, non-porous all-weather plasc
material and with proper care will maintain its beauty for many years.
CLEANING
Using hot soapy water and a sff bristle brush, a so cloth or sponge will remove surface dirt
and grime. Stains can be removed with a water-based cleaner (E.g. Windex, Pledge, Simple
Green, etc.). You can also use a power washer with a medium/ wide nozzle seng to clean the
surface of the product. Cleaning every few months is recommended.
...CAUTION: Do not use cleaners containing aromac solvents or harsh detergent /chemicals
on “Everlast” material.
If dirt and surface contaminants are causing a dirty/brownish nt, an extra step can be taken.
Use a 75% bleach and 25% water mixture and wipe the surfaces down. Allow the mixture to
remain on the product for an hour, then rinse thoroughly. (Be sure to do this in a safe locaon
and protect your eyes, skin, and wear old clothes).
MAINTENANCE
Your HYDROPOOL ‘Everlast’ cabinet is made from a next-generaon outdoor premium
synthec material. If the material is damaged during use (scratched or chipped), it can oen
be repaired.
Repairing Scratches — Take a very fine grade of steel wool (0000 grade) and “sand” the
scratched area in the same direcon that the embossing paern runs. Apply enough pressure
to gradually minimize the scratched area. Once the scratches are reduced, the surface area
may appear dull and possibly even lighter in color; however, this will be less noceable over
me and with outdoor exposure. To finish the repair, apply liquid paste such as Finesse-it,
furniture polish or carnauba wax and buff using auto paint repair buffing wheel to a finish.