Need help?Do you have a question about the Hydrovane HV11 and is the answer not in the manual?
Essential instructions for installation, operation, and maintenance safety.
Safety procedures for isolating power, depressurizing, and locking out.
Precautions for operation, hot surfaces, and compressed air hazards.
Explains hazard symbols and their meanings for safe operation and maintenance.
Reasons for high temperatures and automatic shutdown limits.
Performance, installation, and electrical specifications for HV04-HV07 models.
Performance, installation, and electrical specifications for HV11-HV22 models.
Performance, installation, and electrical specifications for HV30-HV45 models.
Guidelines for location, surface levelness, load capacity, and access.
Warning about qualified electricians and compliance with wiring regulations.
Procedures for connecting mains supply via isolator and terminal connections.
Steps to verify correct motor rotation to prevent damage.
Initial checks, operation overview, and starting procedures for compressors.
Procedures for adjusting load and unload pressures for single-speed units.
Adjusting pressure settings for Regulated Speed (RS) compressors.
Safety warnings and requirements for authorized service personnel.
Procedures for draining oil and replacing oil filters and separators.
Safety precautions and checks for electrical connections and terminals.
How the controller monitors status and identifies fault types.
Explains shutdown errors and procedures for correction and restart.
Errors that prevent motor start until the fault is corrected.
Essential instructions for installation, operation, and maintenance safety.
Safety procedures for isolating power, depressurizing, and locking out.
Precautions for operation, hot surfaces, and compressed air hazards.
Explains hazard symbols and their meanings for safe operation and maintenance.
Reasons for high temperatures and automatic shutdown limits.
Performance, installation, and electrical specifications for HV04-HV07 models.
Performance, installation, and electrical specifications for HV11-HV22 models.
Performance, installation, and electrical specifications for HV30-HV45 models.
Guidelines for location, surface levelness, load capacity, and access.
Warning about qualified electricians and compliance with wiring regulations.
Procedures for connecting mains supply via isolator and terminal connections.
Steps to verify correct motor rotation to prevent damage.
Initial checks, operation overview, and starting procedures for compressors.
Procedures for adjusting load and unload pressures for single-speed units.
Adjusting pressure settings for Regulated Speed (RS) compressors.
Safety warnings and requirements for authorized service personnel.
Procedures for draining oil and replacing oil filters and separators.
Safety precautions and checks for electrical connections and terminals.
How the controller monitors status and identifies fault types.
Explains shutdown errors and procedures for correction and restart.
Errors that prevent motor start until the fault is corrected.
General| Model | HV11 |
|---|---|
| Power | 11 kW |
| Motor Power | 11 kW |
| Voltage | 400 V |
| Sound Level | 68 dB(A) |
| Weight | 300 kg |
| Type | Rotary Vane |
| Pressure | 7-10 bar |
| Free Air Delivery | 1.9 m³/min |
| Working Pressure | 8 bar |
| Dimensions (LxWxH) | 1200 x 800 x 900 mm |
To Next Page
