Need help?Do you have a question about the Hydthc XPTHC-4 and is the answer not in the manual?
General| Brand | Hydthc |
|---|---|
| Model | XPTHC-4 |
| Category | Controller |
| Language | English |
Product name is XPTHC-4, type is Arc voltage torch height controller.
Supports various plasma cutters and CNC controllers for automatic height control.
Details input power, motor, output, working temp, IHS types, voltage divider, accuracy, speed, and range.
Lists the parts included with the XPTHC-4 unit: control module, operation panel, voltage divider, cables, switch.
Provides guidance on installing the XPTHC-4 control module and related components.
Describes auto work flow, initial height sensing (IHS), setting arc voltage, and adjusting cutting height.
Explains the operation panel layout, key buttons, and LED indicators.
Details how to adjust motor brake and sensitivity for optimal performance.
Guides on setting parameters and understanding alarm codes for troubleshooting.
Specifies power requirements (AC24V/DC24V) and connection guidelines.
Explains the connection and function of the micro switch for Initial Height Sensing.
Details connecting and setting up proximity switches for IHS.
Provides pin definitions and connection details for interfacing with the CNC controller.
Describes the connection to the torch motor, including pin definitions.
Explains connecting to the plasma unit, including voltage divider setup.
Details the voltage divider function and connection for arc voltage monitoring.
Presents a comprehensive wiring diagram for the entire THC system.
Illustrates wiring connections for specific CNC controllers (SF2012/SF2100).
Shows wiring configurations for HYD2000 series CNC controllers.
To Next Page
