Need help?Do you have a question about the Hydthc CHC-1000S and is the answer not in the manual?
General| Brand | Hydthc |
|---|---|
| Model | CHC-1000S |
| Category | Controller |
| Language | English |
Overview of the CHC-1000S in laser cutting processes.
Key features and technical capabilities of the CHC-1000S.
Lists the main hardware parts of the capacitance height control system.
Physical dimensions and mounting details for the main control unit.
Physical dimensions and mounting details for the preamplifier unit.
Visual layout of interfaces and specific power connection details.
Pin definitions for the 25-pin female input and output connector.
Detailed mapping of signals to pins for digital and analog I/O functions.
Guidelines for connecting the sensor cable and its pin configuration.
How the CHC-1000S functions in different operating modes.
Explanation of the function, direction, and control keys on the device.
Description of the main screen, status indicators, and measurements.
Visual guide to the device's menu hierarchy and navigation flow.
Guides through manual calibration, indicators, and calibration steps.
Accessing system test functions and configuring system parameters.
Settings for measuring range, dynamic response, and PID control.
Configuration for filtering, real-time calibration, and vibration suppression.
Settings for collision thresholds, electrode loss, and capacitive decrease alarms.
Settings for network connectivity, IP address, and gateway.
Accessing version information, warnings, restart, and system settings.
Displays software version, ID, and authorization details.
Viewing alarms, restarting the system, and configuring basic settings.
Explains common system warnings and their potential root causes.
Addresses issues related to capacitor calibration and system settings.
Step-by-step guide for performing manual 16-point calibration.
Details the timing and steps for automatic 16-point calibration.
Mandatory steps for calibrating the NOZZLE LOST detection function.
Procedure for adjusting PID parameters to optimize system performance.
Illustrates the typical wiring connections for the CHC-1000S system.
To Next Page
