Hydthc CHC-1000S - Performance Specifications

宏宇达数控 & 弘宇达智能
地址：深圳市南山区中山园路 1001 号 E4-6C（TCL 国际 E 城）
TEL：0755-26625800 FAX：0755-26729960 -4-
1.2 Performance Description
 Sampling rate: 1000 times per second.
 Static measurement accuracy: 0.001mm.
 Following range: 0-25mm.
 The signal will not decay with strong capacity of resisting when the length
of signal transmission cable is up to 100m.
 Support network communications and U disk online update.
 Supports shake suppression function, can effectively suppress shaking
caused by blowing and scumming.
 Adapt to any cutting head and nozzle.
 Support alarm while hitting the board and beyond the edge.
 Supports 1 point, 2 point and 16 point capacitance calibration, which
supports the display of the calibration curve.
 Support capacitor real-time calibration, which can effectively solve the
influence of temperature and other factors on the capacitive sensor.
 16-bit DA output, output voltage (±10V) signal in sensor control mode, or
linear height signal in the distance measurement mode output voltage (0-
10V), 1000 update cycles per second.
 14-bit AD input, detecting external analog voltage signal (0V-10V) to adjust
the static distance in real time.
 Support oscilloscope function to detect capacitance and height changing in
real time.
 Support oscilloscope function, which can view AD/DA changes anytime.
 Support EtherCAT bus communication. (optional)