Hydthc CHC-1000S - System Parameter Overview; Version Information Details

宏宇达数控 & 弘宇达智能
地址：深圳市南山区中山园路 1001 号 E4-6C（TCL 国际 E 城）
TEL：0755-26625800 FAX：0755-26729960 -21-
3.7 System parameters
In the main menu, press <F4> to enter the [Advanced parameter]. As shown below:
3.7.1 Version information
Press <Up> or <Down> to select the target menu item, press <ENTER> to enter the
[version information] menu, as shown below:
Users can view this information:
Information
Definition
version
Program version number of CHC-1000S, such as V2.01. (Plane)
indicates the use for plane cutting. (3D) indicates the use for 3D robotic
cutting.
ID
The global unique serial number of CHC-1000S, such as 1804200001
Authorization
The date the CHC-1000S can be used
Time
CHC-1000S current internal date
Note:
When the CHC-1000S service time expires, the main interface will display the relevant
alarm information (authorization expired), and the key functions will not be available.
Users can press [F1] to register in this interface, enter the registration interface, and
enter the correct registration code to resume normal use.
F4